After the 3 days production of oil pump installation, today we finally put the fuel tanker truck frame and upper body on the beiben truck chassis.
1, Fuel tanker body arragement.
It is supposed to pay great attention once mounting the fuel tanker body. in our plant, the worker need to strictly control the space of fuel tanker body .
2, Connection flow meter, welding ball valve and pipe.
All the connection parts that we used are all produced upon on
module. The advantage is high reliability and excellent working
3, Install the pipe system , PTO connection.
The fuel tanker truck pipe system is a little complicated. We need to
connected the valve and pipe in terms of welding, and flow meter to
valve with bolts. after the whole pipe system finish, we will start the
air seal testing for the whole fuel tanker trucks.
This testing pricess will contiune at least 3 hours , unitl the engineer confirm that piple system is fupply approved.
- Previous:Production of 20 CBM fuel tanker truck ? ( Part 3- Final assembling )
- Next:Production of 20 CBM fuel tanker truck ? ( Part 1 - installation pump )